|
HO STRUCTURES
|
|

|


|
HO Two Car Garage
with full interior framing and cut trusses check out the detail,
from nail holes to engraved roofing shingles.
|
$34.95 plus shipping Order kit HOSG-02
send to Sales@rslaserkits.com
|


|
HO Single Stall Engine House
Reminiscent of the early days of railroads
the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the
features seen on many of the short lines, logging bases, and mines throughout the country.
These structures allowed typical maintenance and storage for a wide range of locomotive
and rolling stock services. These scenes are reflected in the older photographs of
yesteryears railroads.
These kits have full inside framing.
|
Comes in 2 models
Without doors
$85.69 plus shipping Order kit HOEH-01
With doors
$89.95 plus shipping Order kit
HOEH-02
send to Sales@rslaserkits.com
|


|
HO Logging Bunk House Car.
The camp bunk house kit is base on those
found here in the pacific northwest in the early 1900s through the end of railroad logging.
Most of these houses were build on skids then loaded on a flat car and taken to the log camp.
The kit is sized to fit on a 36 ft. Flat car and is supplied with skids. The kit is cut
from Micro plywood and the trim and windows are from sticky back veneer stock.
The only thing we do not supply is the roof material as these
shacks had many roofs on them.
|
$26.50 plus shipping Order kit HOBH-01
send to Sales@rslaserkits.com
|


|
HO The Saw Filers Shack.
This kit is based on one used by the Manary Logging Co.
in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great.
All 20 of the front and side windows are laser cut as double hung and can be positioned
in any open layout you want. The kit is supplied with skids and all the parts are laser cut
from micro plywood, the only parts not supplied are cast detail parts.
|
$28.50 plus shipping
Order kit
HOSF-01
send to Sales@rslaserkits.com
|

|
HO The Logging Camp Dining Shack
Based on those found in the pacific northwest from the early 1900s to the
end of RR logging.
Footprint: 15/8 x 5 1/8'
|
$26.50 plus shipping Order kit H2021
send to Sales@rslaserkits.com
|

|
HO The Skid Shack (2 per kit)
These little shacks were used by Weyerhauser
at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad
logging they were used as crossing shacks and storage shacks. With a foot print of
10 x 20 feet they will fit almost anywhere. Kit inclues 2 shacks and 4 bunk bed kits.
Thanks to Frank Telewski PH.D. for the use of his drawings.
|
$26.95 plus shipping Order kit H2020
send to Sales@rslaserkits.com
|


|
HO Greg's Saloon and Repair Shop,
A small structure based on a
design by Paul Templar. Has Saloon doors and all signs as shown, with a footprint
of 3 1/2 by 5. The saloon is named for the husband of one of my co-workers that
has cancer and could not find a Saloon for his layout.
|
$28.50 plus shipping Order kit HOGSR-02
send to Sales@rslaserkits.com
|


|
HO Paul's Repair
Another kit based on Paul Templar's design.
This time a repair and horse shoeing shop. Kit comes with the printed signs
and a glue down tar paper roof.
|
$27.50 plus shipping
Order kit
HOPRS-01
1880's Main Street Series
Complementing any era layout.
The 1800's Main Street Series of small buildings and shops adds a flavor of the early days
of the wild west; right up to any one of the many small towns located throughout parts of
America and Canada, with many still in use today.
RSlaserKits production of this classic building style opens the way for a fun,
fast, simple kit design for the newer modelers, while it's design can leave the
door open to all modelers looking for that small town appearance.
|
|


|
First up is an Old Town Shop
this could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or
any other tradesman's shop.
|
$25.65 plus shipping Order kit HOOTS-01
send to Sales@rslaserkits.com
|

|
The Second in the series is a Main Street Store.
False front stores like these were a staple on main streets all over North America.
|
$25.65 plus shipping Order kit HOOTS-02
|

<
|
For that special spot on the layout.
See how many of your visitors notice this little gem.
|
$8.00 plus shipping Order kit HOOH-01
send to Sales@rslaserkits.com
|