Mobirise Website Generator

HO Scale Structures

(prices do not include shipping)

Single Stall Engine House
With Doors

2003

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical maintenance and storage for a wide range of locomotive
and rolling stock services. These scenes are reflected in the older photographs of yesteryears railroads. These kits have full inside framing.
Footprint: 4.25" x 8.25"

$129.75

Single Stall Engine House
Without Doors

2004

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical maintenance and storage for a wide range of locomotive
and rolling stock services. These scenes are reflected in the older photographs of yesteryears railroads. These kits have full inside framing.
Footprint: 4.25" x 8.25"

$123.15

Greg's Saloon and Repair Shop

2005

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown, with a footprint of 3 1/2 by 5. The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon for his layout.
Footprint: 3.7" x 5.0"

$37.35

Paul's Repair

2006

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.
Footprint: 3.7" x 5.0"

$35.70

Split-Level Outhouse

2007

For that special spot on the layout. See how many of your visitors notice this little gem.

$10.40

Outhouses (3 pack)

2010

Out house’s were an icon until the late 50 in most of rural America and still many are in use today. The kit includes 3 unique out houses with seats. Two single stall and one two stall. Use them behind the house or barn, or in your yard so your train crew has a place to go read.

$13.15

Log Cabin

2016

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.
Footprint 2.3” x 2.3”.

$19.75

Derelict Passenger Car

2017

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

$37.35

Wills Farm Supply

2008

One of the 5 structures in our new complex of kits. Includes laser cut wood walls, laser cut heavy card roof boards, laser cut double hing windows and doors, Northeastern corrugated roofing and laser cut roll roofing for dock and office add roofs. Dock and Dock roof framing are board on board construction with laser cut cutting jigs for all parts but the deck boards themselves. All strip wood and bracing material supplied with the kit.
With a foot print of 9" by 9" this makes for a main industry. 

$173.75

3 Bay Open Storage Shed

2009

Second structure for the Feed and Seed complex is a 3 Bay Open Storage Shed.  Laser kit stud back and end wall framing with plywood sheeting for the exterior walls and enough to sheet the inside of any two interior bays. Roll roofing is included.
With a foot print of 2" by 6" it has plenty of storage room.

$39.00

Dave`s House

2011

Typical 1-1/2 story frame house. These structures can be found anywhere.
Footprint: 2.5" x 3.5".

$52.75

One Car Garage

2012

Comes with doors as shown, plus a new roll-up door. Makes it suitable for any era layout.
Footprint: 1 5/8" x 2 3/4".

$26.35

Eatery At Forks

2013

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.
Footprint: 5.25” x 2.75”

$45.60

Log Lodge

2015

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing.
Footprint: 5.5 ” x 7.5”.

$78.05

1880s Gem Hotel - Zelda's B&B

2022

This can serve as anything from a typical 1880s hotel up to a refurbished building for tourists in your area. (Note: N Scale model shown)
Footprint: 4.5" x 7.0"

$75.85

Hotel Building Facade Kit

2022-F

This can serve as anything from a typical 1880s hotel up to a refurbished building for tourists in your area. Note: This is the front Facade only. Kit Includes the front wall and porches only.
N Scale model shown.
Footprint: 4.5" x 1.75"

$49.05

Logging Bunk House Car

2019

The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car and taken to the log camp. The kit is sized to fit on a 36 ft. Flat car and is supplied with skids. The kit is cut from Micro plywood and the trim and windows are from sticky back veneer stock. The roof material is glue down tar paper.

$34.60

The Skid Shack (2 pack)

2020

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. Kit inclues 2 shacks and 4 bunk bed kits. Thanks to Frank Telewski PH.D. for the use of his drawings. With a footprint of 10 x 20 feet they will fit almost anywhere.

$35.15

The Logging Camp Dining Shack

2021

Based on those found in the pacific northwest from the early 1900s to the end of RR logging.
Footprint: 1.625" x 5.125" 

$33.50

The Saw Filers Shack

2018

This kit is based on one used by the Manary Logging Co. in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side windows are laser cut as double hung and can be positioned in any open layout you want. The kit is supplied with skids and all the parts are laser cut from micro plywood, the only parts not supplied are cast detail parts.

$37.35

The Cheltenham Station

2024

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's So this station can be used right through the transition period.
Footprint: 5.5" x 8.75"

$95.10

Logging Cook or Kitchen Shack

2025

Based on the Cherry Valley Lumber Car in the North-West.

$33.50

Loading Dock

2026

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do not have access to a siding so they can unload rail cars, semi trucks etc.
Footprint: Dock 1.375” x 6.0”. Ramp 1.375” x 2.5”.

$24.70

Plantation Store

2029

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the structure.
Footprint: 6.5" x 8.0"

$92.35

Plantation Store Facade Kit

2029-F

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the structure. Note: This is the front Facade only. Kit Includes the front wall and porches only.
Footprint: 5.0" x 1.25"

$35.55

Main Street Store

2030

False front stores like these were a staple on main streets all over North America.
Footprint: 3.25" x 4.15"

$34.60

Old Town Shop

2031

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.
Footprint: 3.25" x 4.15"

$33.50

Cape House

2032

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.
Footprint: 3.25" x 4.25”

$45.45

Cape Garage

2033

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.
Footprint: 3.0" x 3.5”

$28.00

LG’s Billiards / Deadwood Gazette

2036

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses.
Footprint: 2.5” x 4.0”

$41.75

LG’s Billiards / Deadwood Gazette
Facade Kit

2036-F

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front wall and porches only.
Footprint: 2.375” x 1.0”

$14.85

Silver Cliff Firehouse - Town Hall

2037

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum.
Footprint: 3.5" x 3.25"

$57.70

Tom’s Country Store

2038

Based on a store in Jefferson Oregon.
Footprint: 2.25” x 4.0”

$25.25

BillCo Freight

2040

Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig.
Footprint: Dock 2.25" x 4.5".
Building 2.25" x 2.25".

$17.55

Keystone Mill

2041

The original Keystone Mill was built in the late 1900s and still stands today as a lumber yard in Pennsylvania. Each kit features a foundation cast by Downtown Deco, board-on-board laser-cut siding, and Northeastern lap siding. This kit is limited to a run of 200 so reserve yours today.
Footprint: 12" x 5"

$189.70

Vicky’s Veggie’s

2042

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes Tichy windows and doors, interior display cabinets plus a downloadable interior framing sheet by Clever models.
Footprint: 4.125” x 4.375”.

$37.90

Jeff's Roach Shack

2046

Best burgers in town! Kit includes Northeastern Lap siding, Stip wood corners and bracing, Grandt line smoke stack details, Tichy train group door, 3 tab roofing, plus two laser cut picnic tables and signs for at least 4 businesses.
Footprint: 1.75” x 2.75”

$18.24

Carl's Cabin

2048

Carl’s cabin is like many that were found in find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house. Includes the outhouse and Grandt line smoke jack. Multiple window and door locations.
Footprint: 2.25” x 4.0”

$54.95

Northern Enclosed Water Tower

2050

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts.
Footprint: 4" x 4".

$68.24

Madden Corner Water Tank

2053

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included.
Footprint: 2.375” x 2.375” x 5.5" tall.

$43.95

Courter Factory

2057

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the 1920’s it was the home of Harter Silos. Harter had the patent for the wood and concrete silos seen all over the country and many of the kits were built in this building. Sadly the building burnt down in the late 50's early 60's. The building can be built with the loading dock on either side and the side addition can be moved or built as a stand alone structure
Footprint: Main Building 8.25" x 13.8" with out addition, 15.25" x 13.8" with addition. The Addition as a stand alone is 3.25" x 5.52".

$225.00

The Grove

2059

A typical downtown Brick building found on most downtown Main streets. Two Stores on the main floor and Apartment above with a back deck and stairs. Includes laser cut task board and basswood walls, laser cut windows and a sign sheet.
Footprint: 4.0" x 6.0".

$104.95

Steam Sawmill with Planer

HO-SM-KMP

Northeastern scale lumber, custom white metal castings and Grandt and Campbell details. Craftsman Kit.

$88.85

Sawmill Outbuildings

HO-SMO-KMP

Northeastern scale lumber, custom white metal castings and Grandt and Campbell details. Craftsman Kit.

$72.65

Chelsea Station

SCM201

This kit models the prototype structure using the best currently available information. The colors used on the prototype are unknown. Laser Cut Accuracy - Precise Fit - Easy Assembly. Contains structure kit only.
Platform: 12’ x 12’ (About 1.65” square) Shelter: 8’ x 8’ (About 1.17” square)

$24.15

Potato House

SCM202

Includes Lean-to extension, Several Window, door and chimney options plus 12 wood barrels and 10 pallets. Laser Cut Accuracy - Precise Fit - Easy Assembly.
Footprint: Including Steps 7.5” x 4.5”

$102.80

Randolph Depot

SCM203

This charming Victorian structure will be right at home on your layout. This kit has been designed to accurately represent the prototype structure in HO scale. Builds either early or late version. Additional white metal details included! More than 230 pieces of precision laser cut wood, + shingle sheets, roof panels have scribed peel and stick installed.
Footprint: 7” wide x 5.5” deep. (Without platform: 5” x 5”)

$151.20

Jack’s Cabin Water Tank

SCM204

Modeled from the D&RGW Narrow Gauge Prototype. Note: This is a Narrow Gauge tower and would need to be raised some for Standard gauge. Track and scenery are not included.
Footprint: 2.2” wide by 3.0" deep.

$66.50

Wood Truss Rod Bridge (55' Span)

2028

The bridge has 7.25" to 8" between supports.

$45.45

Visit Often

Always designing new kits

We are always working on new kits.
Check out of "Future Kits" page for a sneak peak.

Custom Designs

Just Ask

We are a supplier of kits for model railroading and also offer custom design and cutting of your projects at competitive prices. Contact us for a quote.

Customer Gallery

Always adding new photos

Photos from our customers. You can submit yours too..