|
N SCALE STRUCTURES
|
|
|
|
Single Stall
Engine House
Reminiscent of the early days of railroads
the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the
features seen on many of the short lines, logging bases, and mines throughout the country.
These structures allowed typical maintenance and storage for a wide range of locomotive
and rolling stock services. These scenes are reflected in the older photographs
of yesteryears railroads.
These kits have full inside framing.
|
Comes in 2 models
Without doors
$57.85
plus shipping
Order kit:
NEHO-01
With doors
$60.55 plus shipping
Order kit:
NEHC-01
send to Sales@rslaserkits.com
|
|
Woss Camp
Water Tower
the tower from woss camp of the canadian
logging railroad in the nimpkish valley in central vancouver island bc.
The tower was used till the 1970's and many tanks to Tom Beaton for drawing
this tank so a little piece of logging history could be saved in model form.
|
$25.00
plus shipping
Order Kit:
NWWT-01
send to Sales@rslaserkits.com
|
|
The Camp/Dinning Shack
Based on those found in the pacific northwest
from the early 1900s to the end of RR logging.
Footprint: 15/8” x 5 1/8'
|
$26.50
plus shipping
Order kit:
N3021
send to Sales@rslaserkits.com
|
|
The Skid Shack
(2 per kit)
These little shacks were used by Weyerhauser
at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad
logging they were used as crossing shacks and storage shacks. With a foot print of
10 x 20 feet they will fit almost anywhere. Kit inclues 2 shacks and 4 bunk bed kits.
Thanks to Frank Telewski PH. D. for the use of his drawings.
|
$21.95
plus shipping
Order kit:
N3020
send to Sales@rslaserkits.com
|
|
Two Car Garage
The Kits will have parts to build one Garage with
interior studs or just build it using the outer walls and have one under construction.
The parts include two door options, a famed door as shown on the right side and a more
modern roll up door on the left side, plus extra trusses and plywood sheets to add
to that construction site look.
$12.95 for the Framing kit,
$17.95 for the Shell kit or $29.98 for the combined kits (frame, construction
kit less the trusses and shell kit).
|
For the framing kit
Order Kit:
NGF-01
For the combined kit
Order Kit:
NSG-01
For the Shell Kit
Order Kit:
NGS-01
send to Sales@rslaserkits.com
|
|
Logging Bunk House Car.
The camp bunk house kit is base on those
found here in the pacific northwest in the early 1900s through the end of
railroad logging. Most of these houses were build on skids then loaded on a
flat car and taken to the log camp. The kit is sizes to fit on a 36 ft. Flat
car and is supplied with skids. The kit is cut from Micro plywood and the
trim and widows are from sticky back veneer stock. The only thing we do not
supply is the roof material as these shacks had many roofs on them.
|
$19.25
plus shipping
Order Kit:
NBH-01
send to Sales@rslaserkits.com
|
|
The Saw Filers Shack
This kit is based on one used by the Manary
logging co. in the 1920's.
It also could be used today as a flower-garden shop
or Artist Studio and look great. All 20 of the front and side widows are laser
cut as double hung and can be positioned in any open layout you want.
The kit is supplied with skids
and all the parts are laser cut from micro plywood,
the only parts not supplied are the cast detail parts
|
$21.50
plus shipping
Order Kit:
NSFS-01
send to Sales@rslaserkits.com
|
|
Greg's Saloon and Repair Shop,
A small structure based on a design by
Paul Templar. Has Saloon doors and all signs as shown, with a footprint of 3 1/2"by 5"
The saloon is named for the husband of one of my co-workers that has
cancer and could not find a Saloon for his layout.
|
$21.50
plus shipping
Order Kit:
NGSR-02
send to Sales@rslaserkits.com
|
|
Paul's Repair
Another kit based on Paul Templar's design.
This time a repair and horse shoeing shop. Kit comes with the printed
signs and a glue down tar paper roof.
|
$20.95
plus shipping
Order Kit:
NPRS-01
send to Sales@rslaserkits.com
|
|
Unique Split-Level Outhouse
A real eye opening conversation piece.
For that special spot on the layout.
See how many of your visitors notice this little gem.
|
$5.00
plus shipping
Order Kit:
NOH-01
send to Sales@rslaserkits.com
|
|
1880's Main Street Series
Complementing any era layout The 1800's Main Street Series
of small buildings and shops adds a flavor or the early days of the wild west;
right up to any one of the many small towns located throughout parts of America
and Canada, with many still in use today.
RSlaserKits production of this
classic building style opens the way for a fun, fast, simple kit design for the
newer modelers, while it's design can leave the door open to all modelers looking
for that small town appearance.
|
|
First up is an Old Town Shop
this could be a Blacksmith shop,
Gunsmith shop, Carriage Repair shop or any other tradesman's shop.
|
$17.00
plus shipping
Order Kit:
NOTS-01
send to Sales@rslaserkits.com
|
|
The Second in the series is a Main Street Store. False front stores
like these were a staple on main streets all over North America.
|
$17.00
plus shipping
Order Kit:
NOTS-02
send to Sales@rslaserkits.com
|
|
Willamette Yarder Steam Donkey
Northestern scale lumber,
custom white metal castings and Grandt & Campbell detail craftsman kit.
|
$31.45
plus shipping
Order Kit:
N-Donkey-01
send to Sales@rslaserkits.com
|