Z STRUCTURES
We ship Worldwide
send to Sales@rslaserkits.com
Want to use your
give us a call
503-371-4290
Wills Feed and Seed one of the 5 structures in our new complex of kits. With a foot print of 3.5" by 3.5" this makes for a main industry. It includes 2 different roof signs, laser cut plywood walls, laser cut widows and trim, plus glazing, loading dock stairs and foundation.(pre-production model shown)
$45.99
plus shipping
Order Kit:
4008
Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed.With a foot print of 1.5" by 4.5" it has plenty of storage room. Laser kit stud back and end wall framing with plywood sheeting for the exterior walls and enough to sheet the inside of any two interior bays. Roll roofing is included.
$19.99
plus shipping
Order Kit:
4009
The Cheltenham Station
Is one of many built to a standard design in Southern
Ontario, Canada around the turn of the century.
The last one used was in Cheltenham
and was replaced in the late 1950's
So this station can be used
right through the transition period.
For an independent review of this kit check out
The Scratchbuilders Guild
$39.99 plus shipping
Order kit
4024
This versitile structure could be either the
1880s Gem Hotel
OR
Zelda's B&B
A refurbished building for tourists in your area.
$39.95
plus shipping
Order Kit:
4022
Another in the 1880s Main Street Series
Dakra's Dry Goods
This little shop is typical of businesses
in small towns across the country.
Some are still standing today,
they have been renovated for a variety of uses.
For an independent review of this kit check out
The Scratchbuilders Guild
$22.49
plus shipping
Order Kit:
4023
Here's a structure found on every railroad in any town.
Little loading docks like these have been used since
the start of railroading and are still in use today.
They service the industries that do not have access
to a siding so thy can unload rail cars, semi trucks etc.
The dock is 10 by 40 feet with a
positionable ramp of 10 by 19 feet.
$10.99
plus shipping
Order Kit:
4026
Single Stall
Engine House
Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical maintenance and storage for a wide range of locomotive and rolling stock services. These scenes are reflected in the older photographs of yesteryears railroads.
These kits have full inside framing.
$33.50
plus shipping
Order kit:
4003
Two car Garage
The Kits will have parts to build one Garage with interior studs or just build it using the outer walls and have one under construction. The parts include two door options, a famed door as shown on the right side and a more modern roll up door on the left side, plus extra trusses and plywood sheets to add to that construction site look.
These run
$12.98
for the Framing Kit.
$23.50 for the Shell Kit.
For the Framing Kit, order 4001F For the Shell Kit 4001S
The Saw Filers Shack
This kit is based on one used by the Manary
Logging Co. in the 1920's.
It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side widows are laser cut as double hung and can be positioned in any open layout you want. The kit is supplied with skids
and all the parts are laser cut from micro plywood, the only parts not supplied are the cast detail parts
$14.49
plus shipping
Order Kit:
4018
Logging Bunk House Car
This car can be mounted on your flat car or set on the supplied skids. Either was used in the log camps. The kit is laser cut using micro plywood and all glazing material is supplied, the roofing is glue down tar paper.
$14.75
plus shipping
Order Kit:
4019
A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown. Also has a glue down tar paper roof.
The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon for his layout.
$17.50
plus shipping
Order Kit:
4005
Paul's Repair
Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.
$17.50
plus shipping
Order Kit:
4006
Complementing any era layout The 1800's Main Street Series of small buildings and shops
adds a flavor or the early days of the wild west; right up to any one of the many small towns
located throughout parts of America and Canada, with many still in use today.
RSlaser Kits production of this classic building style opens the way for a fun, fast,
simple kit design for the newer modelers, while it's design can leave the door open
to all modelers looking for that small town appearance.
Shop on Left.
First up is an Old Town Shop
this could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.
$13.50
plus shipping
Order Kit:
4031
Store on Right.
Second in the series is a Main Street Store.
False front stores like these were a staple on main streets all over North America.
$13.50
plus shipping
Order Kit:
4030